Ametek BPS Series Programming Manual Instrukcja Użytkownika Strona 118

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 226
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 117
AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual
118 Manual P/N 7003-961 Rev AA
This query returns the SCPI version number to which the AC/DC source complies. The
returned value is of the form YYYY.V, where YYYY represents the year and V is the revision
number for that year.
Query Syntax SYSTem:VERSion?
Parameters None
Returned Paramters <NR2>
Example SYST:VERS?
SYSTem:HISTory[:RECords]? LAST|<numeric value>
This command is only available for the RS270 base system.
This query returns the history record number for the last error if the query parameter is
LAST. The query command can be send again with record number to retrieve the fault data
for this record and any record prior to the last record. The record format is a commas
separated data as follows:
Record number, integer
Model, string
Elapse time hours, minutes, and seconds, integer
Regenerative state, external oscillator reference, integer
Set Voltage A, Set Current A, Set regenerative Current A, float
Measure Voltage A, Measure current A, Measure power A, float
Set Voltage B, Set Current B, Set regenerative Current B, float
Measure Voltage B, Measure current B, Measure power B, float
Set Voltage C, Set Current C, Set regenerative Current C, float
Measure Voltage C, Measure current C, Measure power C, float
Fault byte, integer
The fault byte is defined as follows:
Unregulated bit 0
Temperature bit 1
Current bit 2
Negative current bit 3
Negative power bit 4
Query Syntax SYSTem:HISTory? LAST
Returned Parameters <NR2>
Query Syntax SYSTem:HISTory? <Record number>
Returned Parameter Data for this record per definition above
Example SYST:VERS?
SYSTem:LOCal
This command can only be used with the RS-232 interface. It sets the interface in Local
state, which enables the front panel controls.
Przeglądanie stron 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 225 226

Komentarze do niniejszej Instrukcji

Brak uwag