Ametek BPS Series Programming Manual Instrukcja Użytkownika Pobierz pdf (Strona 78)

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual

78 Manual P/N 7003-961 Rev AA

4.11.5 Programmable Impedance [MX15-1Pi/MX30-3Pi/MX45-3Pi/RS Only]

OUTPut:IMPedance[:STATe] [MX15-1Pi / MX30-3Pi / MX45-3Pi / RS Series Only]

Phase Selectable

This command enables or disables the source output impedance programming. The state of

a disabled output impedance is equivalent to the minimum impedance. The query form

returns the output state.

Command Syntax OUTPut:IMPdance[:STATe]<bool>

Parameters 0 | OFF | 1 | ON

*RST Value OFF

Examples OUTP:IMP 1 OUTP:IMP:STAT ON

Query Syntax OUTPut:IMPdeance[:STATe]?

Returned Parameters 0 | 1

Related Commands OUTPut:IMPedance:REAL OUTput:IMPedance:REACtive

OUTPut:IMPedance:REAL [MX15-1Pi / MX30-3Pi / MX45-3Pi / RS Series Only]

Phase Selectable

This command sets the real part of the output impedance of the AC source in mili-ohms.

OUTPut:IMPedance:STATe must be enabled for the programmed impedance to affect the

output.

Command Syntax OUTP:IMPedance:REAL<NRf>

Parameters min to 200

*RST Value min

Examples OUTP:IMP:REAL 200

Query Syntax OUTPut:IMP:REAL?

Returned Parameters <NR2>

Related Commands OUTP:IMP OUTP:IMP:REAC

OUTPut:IMPedance:REACtive [MX15-1Pi / MX30-3Pi / MX45-3Pi / RS Series Only]

Phase Selectable

This command sets the reactive part of the output impedance of the AC source in micro

Henry. OUTPut:IMPedance:STATe must be enabled for the programmed impedance to

affect the output.

Command Syntax OUTP:IMP:REACtive<NRf>

Parameters min to 220 (uHenrys)

*RST Value min

Examples OUTP:IMP:REAC 150

Query Syntax OUTPut:IMP:REACtive?

Returned Parameters <NR2>

Related Commands OUTP:IMP OUTP:IMP:REAL

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 225 226

Brak uwag

Ametek BPS Series Programming Manual Instrukcja Użytkownika Strona 78