Ametek BPS Series Programming Manual Instrukcja Użytkownika Pobierz pdf (Strona 184)

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual

184 Manual P/N 7003-961 Rev AA

IEC413:SWEep:CURRent:RESonant?

This command will return the measured harmonic resonant current. This data is available

after the sweep is completed. If no resonant current is found, the command will return a null

char.

Command Syntax IEC413:SWEep:CURRent:RESonant?

Parameters none

Query Syntax IEC413:SWE:CURR:RES?

Returned Parameters <NR2>,.... ,<NRn>

IEC413:SWEep:FREQuency:RESonant?

This command will return the frequency resonant data points that correspond to the

harmonic current data points. This data is available after the sweep is completed. If no

resonant current is found, the command will return a null char.

Command Syntax IEC413:SWEep:CURRent:RESonant?

Parameters none

Query Syntax IEC413:SWE:FREQ:RES?

Returned Parameters <NR2>,.... ,<NRn>

IEC413:HARMonics:LEVel

This command will set the level for the harmonics test. The command will accept either one

parameter or a sequence of parameters from the second harmonic to the fortieth harmonic.

In case of one parameter, the level will be set for the selected harmonic number specified by

IEC413:INDV:HARM:NUMBer. The IEC413:STATe must be in the off position and the user

class must be selected to accept the command.

Command Syntax IEC413:HARMonics:LEVel <Nrf+> [,<Nrf>,....<Nrfn>]

Parameters 0 to 20%

Examples IEC413:HARM:LEV 4,5.......,8

Query Syntax IEC413:HARM:LEV?

Returned Parameters <NR2>,...,<NR2>

IEC413:HARMonics:PHASe

This command will set the phase angle of the harmonics wave form relative to the

fundamental. The command will accept either one parameter or a sequence of parameters

from the second harmonic to the fortieth harmonic. In case of one parameter, the phase will

be set for the selected harmonic number specified by IEC413:INDV:HARM:NUMB. The

IEC413:STATe must be in the off position and the user class must be selected to accept the

command.

Command Syntax IEC413:HARMonics:PHASe <Nrf+> [,<Nrf>,....<Nrfn>]

Parameters 0 to 360

Examples IEC413:HARM:PHAS 180,270,.......,90

Query Syntax IEC413:HARM:PHAS?

Returned Parameters <NR2>,...,<NR2>

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 225 226

Brak uwag

Ametek BPS Series Programming Manual Instrukcja Użytkownika Strona 184